Cub Cadet PRO Z 148 L EFI 48" Zero-Turn Riding Mower

Cub Cadet PRO Z 148 L EFI 48" Zero-Turn Riding Mower
Brand: Cub Cadet
Product Code: PRO Z 148 L EFI
Availability: In Stock
Call for Price (812)876-9302
Description Reviews (0)

Cub Cadet PRO Z 148 L EFI 48" Zero-Turn Riding Mower

Specifications:
Lap Bar / Steering Wheel Adjustment: 3/4 length padded bars w/toolless quick adjust dial
Frame: Fully welded, full-length 12ga. channel frame with 14ga. reinforcements
Front Axle / Yokes: 2" x 3" solid steel and 3/8" thick steel with sealed ball bearing front yokes
Rear Bumper: 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
ROPS: 2"x2" Foldable 3 Position Low Profile Clearance
Length / Width / Height with chute down and ROPS up: 80" L x 61" W x 70" H
L / W / H with discharge chute UP and ROPs DOWN: 80" L x 49" W x 48" H
Weight (approx): 970 lbs.
Battery Voltage: 230 cold crank amp
Alternator: 15 amp regulated
Park Brake / Braking: Integrated system in Lap Bars for ease of use
Lap Bar / Steering Wheel Control: High Performance & Speed Control
Front Tires: 13" x 6.5" - 6" (smooth)
Rear Tires: 23" x 10.5" - 12" (Turf Master)
PTO Clutch: Warner Clutch - 125 ft lb.
Seat Type: High-back suspension with a seat belt, adjustable armrests, and 6" seat travel
Cruise Control: N/A
Safety Systems: Operator presence
Spindle Construction: 5" sealed cast aluminum housing (maintenance-free)
Deck Material: Fully welded 10ga. (.135") steel deck shell with reinforcements totaling.560"
Discharge Chute: High-density, impact-resistant rubber
Top Reinforcement(s): 2ga. (.250") top plate
Blade-Tip Speed (Approx): 18,500 fpm
Deck Height Adjustment: Hand Lever / 15 position / spring assist
Side Construction: 5/16"(.313) steel on trim and discharge sides
Bottom Reinforcement: 7ga. (.175") steel
Trim-Side Wear Guard: 3/4" Thick UHMW-PE Replaceable Trim-side Wear Guard
Deck Blades: 3 high-lift Marbain® blades / 18,500 fpm (approx.)
Leading Edge Reinforcement: 1/4" (.250") steel
Spindle Covers: Steel - Toolless Quick Release
Deck Size/Type: 48" Fabricated Deck
Cutting Height: 1" - 5"
Deck Style/Construction: Floating, fabricated 10ga. (.135”) steel shell (e-coated)
Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
Cup Holder: Integrated into Side Pod
Hour Meter: Standard electronic
Warranty: 2-year limited commercial warranty (no hour limitations) or 4-year/500-hour limited residential warranty
Fuel Capacity: Twin tanks - 3.5-gallon ea. (7 gallon total) with an oversized filler opening
Ground Speed: 9.5mph fwd. / 4.5mph rev.
Engine Type: Kohler Confidant EFI EZT-740
Horsepower / CC's: 25hp - 747cc
Transmission: 12cc Hydro-Gear® ZT 3400 with charge pumps

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: